LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Antilock Brake System - Hybrid (Hp2)) >> Diagnostic Information and Procedures >> DTC C0186 or C0196 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, using a scan tool, clear the DTC.
  2. Test drive the vehicle while observing the scan tool Yaw Rate and Lateral Accelerometer Sensor parameter. The parameters should vary as the vehicle changes directions.
    • If the parameters are locked or erratic, refer to Circuit/System Testing.
scientia non olet · About LEMON Manuals