LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Engine Electrical (Battery) - Hybrid (Hp2)) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Battery Hold Down Retainer Bolt 25 N.m 18 lb ft
Battery Tray to Battery Tray Reinforcement Bolts 9 N.m 80 lb in
Battery Tray to Auxiliary Underhood Electrical Center 9 N.m 80 lb in
Battery Tray Front Support Bolt 9 N.m 80 lb in
Engine Ground Strap to Front Dash Panel Nut 9 N.m 80 lb in
Engine Ground Strap to Left Cylinder Head Bolt 16 N.m 12 lb ft
Engine Wiring Harness Ground Lead Bolt 9 N.m 80 lb in
Generator Control Module Ground Strap Bolt 9 N.m 80 lb in
Negative Battery Cable to Engine Block Bolt 50 N.m 37 lb ft
Positive Battery Cable to Mega Fuse Stud Nut 9 N.m 80 lb in
Positive Battery Cable to Underhood Electrical Center Nut 9 N.m 80 lb in