LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Engine Electrical (Battery) - Hybrid (Hp2)) >> Repair Instructions >> Generator Control Module Ground Strap Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Drive Motor Generator Control Module Ground Strap & Bolt
    GM1968778Courtesy of GENERAL MOTORS COMPANY
  1. Remove the air cleaner assembly. Refer to Upper Intake Manifold Cover Replacement .
  2. Remove the drive motor generator control module ground strap bolt (1) and strap (2).
scientia non olet · About LEMON Manuals