LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Engine Electrical (Battery) - Hybrid (Hp2)) >> Repair Instructions >> Battery Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Battery Components
    GM1968005Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the radiator support diagonal brace. Refer to Radiator Support Diagonal Brace Replacement .
  3. Reposition the positive battery cable insulating cover (2) from over the positive terminal.
  4. Rotate the lever lock (1) counterclockwise in order to disconnect the positive battery cable.
  5. Remove the positive battery cable terminal (3) from the battery.
    6. Fig 2: Locating Battery Assembly, Hold Down & Bolt
    GM1968645Courtesy of GENERAL MOTORS COMPANY
  6. Remove the battery hold down bolt (1) and hold down (3).
  7. Remove the battery assembly (2).
scientia non olet · About LEMON Manuals