LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 474 (Component Locations - Electrical Center Identification Views) >> Electrical Center Identification Views >> Fuse Block - I/P X4

Fuse Block - I/P X4

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Junction Block - Right I/P X3 Connector End Views
GM1667402Courtesy of GENERAL MOTORS COMPANY
Fuse Block - I/P X4

Pin Wire Circuit Function
A1 2 RD/WH 1240 Battery Positive Voltage
A2 0.35 D-GN 5060 Low Speed GMLAN Serial Data
A3-A4 - - Not Used
A5 0.35 PK 1691 Low Reference (DL3 or DR4)
A6-A7 - - Not Used
B1 3 BK 1850 Ground
B2 0.5 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage (DL3 or DPN)
B3 0.5 D-GN 5060 Low Speed GMLAN Serial Data
B4 0.8 RD/WH 140 Battery Positive Voltage
B5 0.5 GY 118 Left Front Speaker Output (-) (UQ3)
0.8 GY 118 Left Front Speaker Output (-) (UQA/UQS)
B6 0.5 TN 201 Left Front Speaker Output (+) (UQ3)
0.8 TN 201 Left Front Speaker Output (+) (UQA/UQS)
B7 0.35 GY 1690 Automatic Day/Night Mirror Signal (DL3 or DR4)
Connector Part Information
  • Harness Type: Driver Door
  • OEM Connector: 15467622
  • Service Connector: 19115664
  • Description: 14-Way F GT 150 280 Series (L-GY)

Terminal Part Information
  • Pins: A1, B1
  • Terminated Lead: Pins A1 - 13575754
  • Terminated Lead: Pins B1 - 13575754 or 13575756
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: Pins A1 - 4/4
  • Core/Insulation Crimp: Pins B1 - F/D
  • Pins: A2, A5, B2, B5, B6
  • Terminated Lead: 13575735
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-2A (GY)
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: Pins A2, B2, B5 (UQ3), B6 (UQ3) - E/C
  • Core/Insulation Crimp: Pins B5 (UQA or UQS), B6 (UQA or UQS) - C/A
  • Pins: B4, B7
  • Terminated Lead: 13575753
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: Pins B4 - 2/A
  • Core/Insulation Crimp: Pins B7 - E/A