LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 470 (Seat Heating System And Seat Cooling System) >> Repair Instructions >> Driver or Passenger Seat Back Ventilation Heating and Cooling Blower Replacement

Driver or Passenger Seat Back Ventilation Heating and Cooling Blower Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Seat Back Blower Assembly & Components
GM1678410Courtesy of GENERAL MOTORS COMPANY
Driver or Passenger Seat Back Ventilation Heating and Cooling Blower Replacement

Callout Component Name
1 Front Seat Back Cushion Finish Panel
Procedure 
Using a nylon flat-bladed tool push the tabs in on the side of the panel to release from the seat back to remove.
2 Front Seat Back Blower Push in Retainer
3 Front Seat Back Blower Rivet (Qty: 2)
Procedure 
Drill out the old rivets and install new rivets when replacing the blower assembly.
4 Front Seat Back Blower Assembly
Procedure 
Disconnect the electrical connector.
scientia non olet · About LEMON Manuals