Clunk Noise When Accelerating During Turns
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Clunk Noise When Accelerating During Turns
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Check for worn or damaged outer wheel drive shaft joints and/or seals. Are the outer wheel drive shaft joints/seals worn? |
Go to Step 2 | System OK |
| 2 | Check for proper clearance between the wheel drive shaft and other components. Correct as necessary. Is the repair complete? |
System OK | Go to Step 3 |
| 3 | Replace the outer CV joints/seals. Refer to Wheel Drive Shaft Outer Joint and Seal Replacement . Is the repair complete? |
System OK | - |