LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions) >> Repair Instructions >> Fuel Tank Draining (Single Tank)

Fuel Tank Draining (Single Tank)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Tank Vent Line Quick Connect Fitting, Hose Clamp, Bracket Bolts & Fill Hose
    GM1964115Courtesy of GENERAL MOTORS COMPANY
  1. Loosen the fuel fill cap in order to relieve the fuel tank vapor pressure.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Loosen the fuel fill hose clamp (6).
  4. Remove the fuel fill hose from the fuel tank.
  5. Insert the hose from the pump devise into the fuel tank.
  6. Using a hand or air operated pump device, drain as much fuel from the tank as possible.