Camshaft Position Sensor Replacement (With Actuator)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Camshaft Position Sensor (With Actuator)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the water pump. Refer to Water Pump Replacement
1	Camshaft Position Sensor Fastener (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 12 N.m (106 lb in)
2	Camshaft Position Sensor Procedure Disconnect the electrical connectors.