LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 465 (Frame And Underbody) >> Repair Instructions >> Trailer Hitch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the hitch platform to the vehicle.
    2. Fig 1: View Of Hitch Platform & Platform Bolts
    GM1702263Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the platform hitch bolts to the frame rails and the rear bumper.
    • Tighten the trailer hitch-to-frame bolts to 113 N.m (83 lb ft).
    • Tighten the trailer hitch-to-bumper bolts to 100 N.m (74 lb ft).
    3. Fig 2: View of Trailer Wiring Harness
    GM399253Courtesy of GENERAL MOTORS COMPANY
  3. Connect the trailer wiring harness.
scientia non olet · About LEMON Manuals