LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 465 (Frame And Underbody) >> Repair Instructions >> Rear Wheelhouse Panel Liner Replacement (RPO X88 Chevrolet, RPO O88 GMC)

Rear Wheelhouse Panel Liner Replacement (RPO X88 Chevrolet, RPO O88 GMC)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Wheelhouse Liner, Screws & Retainers
GM1696894Courtesy of GENERAL MOTORS COMPANY
Rear Wheelhouse Panel Liner Replacement (RPO X88 Chevrolet, RPO O88 GMC)

Callout Component Name
Preliminary Procedure 
Remove the appropriate tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1 Rear Wheelhouse Liner Retainer (Qty: 3)
2 Rear Wheelhouse Liner Screw (Qty: 7)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
3 Rear Wheelhouse Liner
TIP:  Before attempting to remove the wheelhouse liner remove any plastic retainers and/or bolts passing through or attached to the wheelhouse liner.