Rear Wheelhouse Panel Extension Replacement (RPO QST Only)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Wheelhouse Panel Extension

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Rear Wheelhouse Panel Extension Screw (Qty: 7) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Rear Wheelhouse Panel Extension Procedure Position and hold the rear wheelhouse extension to the wheelhouse. Secure the top three screws first. Secure the front and rear wheelhouse screws last.

Callout

Component Name

Rear Wheelhouse Panel Extension Screw (Qty: 7)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Rear Wheelhouse Panel Extension

Procedure

Position and hold the rear wheelhouse extension to the wheelhouse.
Secure the top three screws first.
Secure the front and rear wheelhouse screws last.