LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 465 (Frame And Underbody) >> Repair Instructions >> Assist Step Replacement (GMC Denali XL)

Assist Step Replacement (GMC Denali XL)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Assist Step & Bolts
GM2067145Courtesy of GENERAL MOTORS COMPANY
Assist Step Replacement (GMC Denali XL)

Callout Component Name
1 Assist Step Front (RH) Extension Bolt with Compression Limiter
CAUTION:

Refer to Fastener Caution .


Tighten 
6 N.m (53 lb in)
2 Assist Step Support Bolt (Qty: 4)
Tighten 
6 N.m (53 lb in)
3 Assist Step Support Bracket Bolt (Qty: 4)
Tighten 
6 N.m (53 lb in)
4 Assist Step Front (RH) Extension
TIP:  Position the extension to the assist step prior to securing the nuts and bolts.
5 Assist Step Bracket (Qty: 4)
TIP:  Assemble all of the brackets to the assist step prior to hanging the assist step brackets to the lower rocker panel studs.
6 Assist (RH) Step
TIP:  Right hand assist step shown, left hand side similar.
7 Rocker Panel Stud Nut (Qty: 4)
Tighten 
6 N.m (53 lb in)