Assist Step Finish Cover Replacement (Power BRS)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Power Assist Step Finish Cover & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Deploy the power assist step. Remove the power assist step pad. Refer to Assist Step Pad Replacement (Power BRS) .
1	Power Assist Step Finish Cover Screws (Qty: 10) CAUTION: Refer to Fastener Caution . Tighten 6 N.m (53 lb in)
2	Power Assist Step Finish Cover

Callout

Component Name

Preliminary Procedures

Deploy the power assist step.
Remove the power assist step pad. Refer to Assist Step Pad Replacement (Power BRS) .

Power Assist Step Finish Cover Screws (Qty: 10)

CAUTION:

Refer to Fastener Caution .

Tighten
6 N.m (53 lb in)

Power Assist Step Finish Cover