LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 465 (Frame And Underbody) >> Repair Instructions >> Assist Step Controller Replacement (Power BRS)

Assist Step Controller Replacement (Power BRS)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Power Assist Step Controller & Bolts
GM1811263Courtesy of GENERAL MOTORS COMPANY
Assist Step Controller Replacement (Power BRS)

Callout Component Name
1 Power Assist Step Controller Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
6 N.m (53 lb in)
2 Power Assist Step Controller

Procedure

  1. Disconnect any electrical connectors.
  2. Reprogram the new controller if necessary. Refer to Control Module References .