LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 464 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Underhood Electrical Center or Junction Block Bracket Replacement

Underhood Electrical Center or Junction Block Bracket Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Underhood Electrical Center/Junction Block Bracket & Screws
GM1827694Courtesy of GENERAL MOTORS COMPANY
Underhood Electrical Center or Junction Block Bracket Replacement

Callout Component Name
Preliminary Procedure 
Remove the underhood electrical center/junction block. Refer to Underhood Electrical Center or Junction Block Replacement .
1 Underhood Electrical Center/Junction Block Bracket Screws (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Underhood Electrical Center/Junction Block Bracket