LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 463 (Engine Cooling System) >> Repair Instructions >> Radiator Vent Inlet Hose Replacement (Non-HP2)

Radiator Vent Inlet Hose Replacement (Non-HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Radiator Vent Inlet Hose & Components
GM1821247Courtesy of GENERAL MOTORS COMPANY
Radiator Vent Inlet Hose Replacement (Non-HP2)

Callout Component Name

Preliminary Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. If necessary, remove the air cleaner resonator duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
1 Remove Radiator Vent Inlet Hose Clamp (Qty: 2)
2 Remove Radiator Vent Inlet Hose Support Clip (Qty: 2)
3 Radiator Vent Inlet Hose
scientia non olet · About LEMON Manuals