LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 463 (Engine Cooling System) >> Repair Instructions >> Radiator Surge Tank Inlet Hose/Pipe Replacement (Non-HP2) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Surge Tank Inlet Hose & Clamps
    GM1698684Courtesy of GENERAL MOTORS COMPANY
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  2. Reposition the surge tank inlet hose clamp from the radiator.
  3. Remove the surge tank inlet hose from the radiator.
    4. Fig 2: View Of Surge Tank Outlet Hose & Surge Tank
    GM659059Courtesy of GENERAL MOTORS COMPANY
  4. Reposition the surge tank inlet hose clamp at the surge tank.
  5. Remove the surge tank inlet hose (1) from the surge tank.
scientia non olet · About LEMON Manuals