Engine Coolant Fan Resistor Replacement (Right HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Fan Resistor (Right-HP2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove air cleaner. Refer to Air Cleaner Assembly Replacement Disconnect the electrical connector from the resistor.
1	Engine Coolant Fan Resistor Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Engine Coolant Fan Resistor

Callout

Component Name

Preliminary Procedures

Remove air cleaner. Refer to Air Cleaner Assembly Replacement
Disconnect the electrical connector from the resistor.

Engine Coolant Fan Resistor Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Engine Coolant Fan Resistor