Engine Coolant Fan Motor Replacement (HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Fan Motor (HP2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement (Non-HP2) , Engine Coolant Fan Replacement (HP2) Disconnect the electrical connectors from the cooling fans.
1	Cooling Fan Motor Bolts (Qty: 6) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Cooling Fan Motor(s).

Callout

Component Name

Preliminary Procedures

Remove the cooling blade(s). Refer to Engine Coolant Fan Replacement (Non-HP2) , Engine Coolant Fan Replacement (HP2)
Disconnect the electrical connectors from the cooling fans.

Cooling Fan Motor Bolts (Qty: 6)

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Cooling Fan Motor(s).