LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 463 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Lower Shroud Replacement (Mechanical) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Cooler Hose Clip At Lower Fan Shroud
    GM367017Courtesy of GENERAL MOTORS COMPANY
  1. Install the lower fan shroud and ensure it is centered over lower radiator support.
  2. Engage the two clips from the radiator.
  3. If equipped with the engine oil cooler, Install the oil cooler hose clip to the lower fan shroud.
  4. Install the radiator. Refer to Radiator Replacement (Non HP2) , Radiator Replacement (HP2) .
scientia non olet · About LEMON Manuals