LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 463 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Air Bleed Pipe Replacement (without AFM) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Radiator Vent Inlet Hose & Clamps
    GM1699347Courtesy of GENERAL MOTORS COMPANY
  1. If replacing the rear coolant air bleed covers, remove the intake manifold. Refer to Intake Manifold Replacement (RPOs LC9, LMG, LY5, L76) , Intake Manifold Replacement (RPOs LY2, LY6) , Intake Manifold Replacement (Except RPOs LY2, LY6, LC9, LMG, LY5) . Otherwise proceed to the next step.
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .
  4. Reposition the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
  5. Remove the radiator vent inlet hose (2) from the coolant air bleed pipe fitting.
  6. Fig 2: Removing/Installing Engine Coolant Air Bleed Pipe
    GM1403313Courtesy of GENERAL MOTORS COMPANY
  7. Remove the coolant air bleed pipe bolts (309) (intake manifold shown removed for clarity).
  8. Remove the coolant air bleed pipe (307) and seals (308).
  9. Fig 3: Removing/Installing Coolant Air Bleed Cover Bolts
    GM1403314Courtesy of GENERAL MOTORS COMPANY
  10. Remove the coolant air bleed cover bolts (312), if required.
  11. Remove the coolant air bleed covers (313) and seals (308), if required.
  12. Fig 4: View Of Coolant Air Bleed Pipe Seal
    GM1552485Courtesy of GENERAL MOTORS COMPANY
  13. Remove the seals (308) from the coolant air bleed pipe and/or covers.
  14. Discard the seals.