LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 461 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Using Fused Jumper Wires

Using Fused Jumper Wires

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools 

EL 35616-20F  Fused Jumper Wire

For equivalent regional tools, refer to Special Tools .

WARNING:

This procedure should not be performed on high voltage circuits. Performing this procedure on high voltage circuits may result in serious injury or death.

NOTE:

A fused jumper may not protect solid state components from being damaged.

Fig 1: X102 Forward Lamp Harness to Fan Control Module Harness
GM2389094Courtesy of GENERAL MOTORS COMPANY

The EL 35616-20F  Fused Jumper Wire includes banana jack connectors that provide adaptation to most connectors without damage. This fused jumper wire is supplied with a 20 A fuse which may not be suitable for some circuits. Do not use a fuse with a higher rating than the fuse that protects the circuit being tested.