LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 461 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> FEP Connectors (Steering Gear) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Releasing Locking Tab On Connector
    GM2374629Courtesy of GENERAL MOTORS COMPANY
  1. Use a flat-bladed tool to release the locking tab on the connector.
    2. Fig 2: Twisting Flat-Bladed Tool To Push Top Of Locking Tab Inward
    GM2728308Courtesy of GENERAL MOTORS COMPANY
  2. Option 1: Twist the flat-bladed tool to push the top of the locking tab inward while pulling the connector body out.
    3. Fig 3: Using Flat-Bladed Tool To Depress Locking Tab
    GM2728310Courtesy of GENERAL MOTORS COMPANY
  3. Option 2: Pry using the flat-bladed tool to depress the locking tab while pulling the connector body out.
scientia non olet · About LEMON Manuals