Opening the Liftgate Without Electrical Power

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Liftgate & Trim Panel Plug

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Liftgate
2	Liftgate Trim Panel Plug Procedure Locate dimple on trim panel. Use a 1 1/16 inch hole saw to drill a hole through the trim panel. Using a flat-bladed tool push down on the black bellcrank lever, through the access hole, to unlock the liftgate. Push open the liftgate from the inside. Install a new hole plug.

Callout

Component Name

Liftgate

Liftgate Trim Panel Plug

Procedure

Locate dimple on trim panel.
Use a 1 1/16 inch hole saw to drill a hole through the trim panel.
Using a flat-bladed tool push down on the black bellcrank lever, through the access hole, to unlock the liftgate.
Push open the liftgate from the inside.
Install a new hole plug.