LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Liftgate Motor Clutch Malfunction - DTC B396B >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, transmission in Park, using either the power door lock switches or the remote keyless entry transmitter, LOCK all doors and then UNLOCK all doors. This will set the liftgate module door lock status to unlock.
  2. Select the enable button on the Iinterior liftgate control switch and activate the power open function, verify the scan tool LGM Clutch Actuator Cmd. changes from Inactive to Active.