LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Power Door Lock System And Release Systems) >> Diagnostic Information and Procedures >> Liftgate Ajar Indicator Malfunction (TB7) >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The body control module (BCM) receives an input from the liftgate ajar switch. The ajar switch is normally open when the liftgate is fully closed. When the liftgate is opened, the ajar switch contacts close providing a path to ground. The driver information center (DIC) located at the bottom of the instrument panel cluster (IPC), illuminates the REAR ACCESS OPEN message when the liftgate is open. The IPC receives a serial data message from the BCM indicating the liftgate ajar status.