Rear Side Door Window Weatherstrip Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Door Window Run Channel

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Place the rear door window in the full down position. Remove the rear door trim panel. Refer to Front Side Door Trim Panel Replacement . Remove the rear door inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
1	Rear Door Window Weatherstrip Procedure Use a plastic flat-bladed tool to assist in releasing the window weatherstrip from the door frame. Carefully pull the window weatherstrip from the door flange.

Callout

Component Name

WARNING:

Refer to SIR Warning .

Preliminary Procedures

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
Place the rear door window in the full down position.
Remove the rear door trim panel. Refer to Front Side Door Trim Panel Replacement .
Remove the rear door inner sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .

Rear Door Window Weatherstrip

Procedure

Use a plastic flat-bladed tool to assist in releasing the window weatherstrip from the door frame.
Carefully pull the window weatherstrip from the door flange.