LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 454 (Steering Wheel And Steering Column) >> Diagnostic Information and Procedures >> DTC B2890 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, perform the scan tool Learn Column Soft Stops procedure. Refer to Power Tilt Steering Column Calibration .
  2. Operate the vehicle within the Conditions for Running and Setting. Verify DTC B2890 does not reset.
    • If the DTC resets, replace the MSM.