LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 454 (Steering Wheel And Steering Column) >> Diagnostic Information and Procedures >> DTC B2860 or B2880 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

B2880 01 

The steering column tilt sensor signal voltage is greater than 4.8 volts for more than 2 seconds.

B2880 06 

The steering column tilt sensor signal voltage is less than 0.2 volt for more than 2 seconds.

B2880 5A 

An incorrect steering column tilt sensor signal voltage is seen.

B2880 61 

The steering column tilt sensor signal voltage does not change when the tilt actuator is commanded.

scientia non olet · About LEMON Manuals