Circuit/System Verification
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, engine running, verify the scan tool Battery Voltage parameter is between 12.5 and 15.5 volts.
- If not within the specified range, refer to Charging System Test . If a hybrid vehicle, refer to Charging System Test .
- Ignition ON, perform the display test with the scan tool. The charge indicator should turn ON and OFF when changing between the commanded states.
- If the indicator does not turn ON and OFF between commanded states, replace the IPC.