Parking Brake Release Handle Assembly Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Park Brake Release Handle Assembly & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Park Brake Release Handle Bolt (Qty: 1) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Park Brake Release Handle Cable TIP: Slide the park brake release cable forward to remove it from the park brake module.
3	Park Brake Release Handle