LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 451 (Parking Brake System) >> Repair Instructions >> Parking Brake Intermediate Cable Replacement (1500) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the intermediate park brake cable to the park brake cable equalizer.
  2. Fig 1: Identifying Right Rear Park Brake Cable
    GM2412800Courtesy of GENERAL MOTORS COMPANY
  3. Connect the right rear park brake cable (1) to the equalizer.
  4. Fig 2: Identifying Left Rear Park Brake Cable
    GM2412798Courtesy of GENERAL MOTORS COMPANY
  5. Connect the left rear park brake cable (1) to the equalizer.
  6. Fig 3: Park Brake Cable And Park Brake Cable Connector
    GM1850950Courtesy of GENERAL MOTORS COMPANY
  7. Connect the intermediate cable connector (1) to the front park brake cable (2).
  8. Adjust the parking brake. Refer to Parking Brake Adjustment (1500) , Parking Brake Adjustment (2500) .