LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Expansion (Orifice) Tube Replacement (W/C69-HP2)

Expansion (Orifice) Tube Replacement (W/C69-HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Expansion (Orifice) Tube Replacement (W/C69-HP2)
GM1965601Courtesy of GENERAL MOTORS COMPANY
Expansion (Orifice) Tube Replacement (W/C69-HP2)

Callout Component Name

Preliminary Procedures

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging (Non-HP2) , Refrigerant Recovery and Recharging (HP2) .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
1 Orifice Tube Fitting
CAUTION:

Refer to Fastener Caution .

  • It may be necessary to remove the auxiliary pressure line to separate the orifice tube.
  • Loosen orifice tub fitting and separate the pressure line to access the orifice.

Tighten 
9 (80 lb in)
2 O-ring Seal
TIP:  Remove and discard O-ring. Refer to Air Conditioning O-Ring Seal Replacement .
3 Orifice Tube Assembly
TIP:  Use to remove orifice tube.
Special Tools 
J-26549-E  Orifice Tube Remover