Minimum Tube Length Required Table
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
When you section the rear A/C or heater lines, ensure that the correct minimum length remains in the straight part of the line on both sides of the splice.
Follow the Straight Line Repair procedure in order to repair line damage in a straight section of line.
Follow the Line Sectioning Repair procedure in order to repair any damage in a bend area. Do not repair the rear A/C or heater lines in a bend area, replace the lines. Maintaining the original line shape will prevent vibrations and rub-through.
| Tube Size | Dim A Standard Installation | Dim A Jaw Reversed Installation |
|---|---|---|
| 8 mm (5/16 in) | 29 mm (1 1/8 in) MIN | 19-29 mm (3/4-1 1/8 in) |
| 10 mm (3/8 in) | 29 mm (1 1/8 in) MIN | 19-29 mm (3/4-1 1/8 in) |
| 13 mm (1/2 in) | 29 mm (1 1/8 in) MIN | 19-29 mm (3/4-1 1/8 in) |
| 16 mm (5/8 in) | 32 mm (1 1/4 in) MIN | 23-32 mm (7/8-1 1/4 in) |
| 19 mm (3/4 in) | 34 mm (1 5/16 in) MIN | 23-34 mm (7/8-1 5/16 in) |