Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate O-rings with coolant.
- Install the first O-ring and gently push down into the O-ring pocket (4).
- Install the midspacer and gently push down to first O-ring (3).
- Install the second O-ring and gently push down to the top of midspacer (2).
- Install the retainer clip by lining up the retainer legs with windows on the fitting housing (1).
Push the retainer clip down until the retainer clip legs are engaged into the windows.
- Clean and inspect the pipe end for any nicks, scratches or cracks.
- Install the fitting to the vehicle by pushing the fitting onto the tube until an audible click is heard. Pull back to verify the connection is secure.
- Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) .