LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Auxiliary Heater Core Replacement (Extended Wheelbase)

Auxiliary Heater Core Replacement (Extended Wheelbase)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of HVAC Heater Core, Cover & Bolts
GM1699939Courtesy of GENERAL MOTORS COMPANY
Auxiliary Heater Core Replacement (Extended Wheelbase)

Callout Component Name

Preliminary Procedure

  1. Remove the HVAC module - auxiliary. Refer to Auxiliary HVAC Module Removal and Installation (Standard Wheelbase) , Auxiliary HVAC Module Removal and Installation (Extended Wheelbase) .
  2. Disconnect any wiring connectors or harnesses from HVAC module.
1 Auxiliary HVAC Module Lower Cover Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


TIP:  Remove any fastener clips that secure cover to module.
Tighten 
9 N.m (80 lb in)
2 Auxiliary HVAC Module Lower Cover
3 Auxiliary HVAC Heater Core
TIP:  Ensure all seals and gaskets are in place upon installation.
scientia non olet · About LEMON Manuals