Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the evaporator tube to the condenser using new sealing washers. Refer to Air Conditioning System Seal Replacement .
- Install the evaporator tube nut to the condenser and tighten to 16 (12 lb ft).
- Connect the evaporator tube to the auxiliary A/C tube using new sealing washers, if equipped. Refer to Air Conditioning System Seal Replacement .
- Install the evaporator tube nut to the auxiliary A/C tube, if equipped, and tighten to 16 (12 lb ft).
- Install the evaporator tube to the evaporator.
- Install the evaporator tube nut to the evaporator and tighten to 16 (12 lb ft).
- Install the surge tank hold down nut and bolt and position aside.
- Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
- Install the upper radiator air baffle and deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Yukon) , Radiator Air Upper Baffle and Deflector Replacement (Cadillac) .
- Evacuate and recharge the system. Refer to Refrigerant Recovery and Recharging (Non-HP2) , Refrigerant Recovery and Recharging (HP2) .
- Leak test the fittings of the components using the J-39400-A halogen leak detector.
CAUTION:
Refer to Fastener Caution .