Accident With Frontal Air Bag Deployment - Component Replacement and Inspections
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
After a collision involving air bag deployment, replace the following components.
- Driver steering wheel air bag
- Passenger instrument panel air bag, if deployed
- Inflatable restraint sensing and diagnostic module (SDM), if SDM has DTC B0052 56
- Front and/or side impact sensors
- Driver/Passenger seat side air bag, if deployed
- Seat back cover if side seat air bag is deployed
- Driver/Passenger seat belt anchor and/or retractor pretensioners
Perform additional inspections on the following components.
- Steering wheel air bag coil and the coil wiring pigtail-Inspect for melting, scorching, or other damage due to excessive heat.
- Mounting points or mounting hardware for the passenger instrument panel air bag, steering wheel air bag, SDM, seat side air bag (if deployed) and seat belt anchor and/or retractor pretensioners-Inspect for any damage and repair or replace each component as needed.