Roof Console Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Roof Console Assembly & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Roof Console Dome and Reading Lamp Lens
2	Roof Console Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
3	Roof Console Assembly CAUTION: Do not exert downward force at the forward or rearward edge of the roof console assembly as irreversible damage will occur. Procedures Grasp the right and left sides of the roof console assembly where indicated with arrows and pull downward using equal force on each side in order to release the retainer clips securing the overhead console assembly to the headlining assembly. Disconnect the electrical connectors. If replacing roof console assembly, transfer all necessary components.
4	Roof Console Retainers (Qty: 2)