LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Cup Holder Replacement (Cadillac) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Floor Console Cup Holder
    GM1850476Courtesy of GENERAL MOTORS COMPANY
  1. Open the cupholder assembly.
  2. Remove the screws securing the door to the cupholder.
    3. Fig 2: View Of Front Floor Console Cup Holder Door
    GM1850479Courtesy of GENERAL MOTORS COMPANY
  3. Remove the door from the cupholder assembly.
    4. Fig 3: Inserting Flat Bladed Tool Between Console Assembly And Cupholder
    GM1850481Courtesy of GENERAL MOTORS COMPANY
  4. Insert a flat bladed tool between the console assembly and the cupholder and release the retaining tab.
    5. Fig 4: Identifying Front Floor Console & Cup Holder Assembly
    GM1850482Courtesy of GENERAL MOTORS COMPANY
  5. Remove the cupholder from the console assembly.
scientia non olet · About LEMON Manuals