LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Cup Holder Replacement (Cadillac) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Floor Console & Cup Holder Assembly
    GM1850482Courtesy of GENERAL MOTORS COMPANY
  1. Install the cupholder into the console assembly.
    2. Fig 2: View Of Front Floor Console Cup Holder Door
    GM1850479Courtesy of GENERAL MOTORS COMPANY
  2. Position the door to the cupholder assembly.
    3. Fig 3: View Of Front Floor Console Cup Holder
    GM1850476Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Install the screws securing the cupholder door to the cupholder assembly. Tighten the screws to 2 N.m (18 lb in).
scientia non olet · About LEMON Manuals