LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Armrest Replacement

Front Floor Console Armrest Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Floor Console Lid Assembly & Components
GM1708411Courtesy of GENERAL MOTORS COMPANY
Front Floor Console Armrest Replacement

Callout Component Name
1 Front Floor Console Compartment Cover Assembly
2 Front Floor Console Armrest Assembly Screw (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
3 Front Floor Console Armrest Assembly
TIP:  When replacing the front floor console armrest, inspect the old front floor console armrest hinge assembly for proper operation. If the old hinge assembly is operational and functioning properly, remove and discard the hinge assembly from the new part and use remaining parts of the armrest for replacement, leaving the old hinge in place.