Rear Seat Latch Release Handle Replacement (Rear No. 2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Latch Release Handle Assembly & Nut

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to 3rd Row Seat Replacement (Suburban/Yukon XL) , 3rd Row Seat Replacement (Tahoe/Yukon/Escalade) . Remove the lower finish cover. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) , Rear Seat Number 2 Cushion Panel Replacement (AW2) .
1	Rear Seat Latch Release Handle Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Rear Seat Latch Release Handle Assembly

Callout

Component Name

Preliminary Procedure

Remove the rear seat. Refer to 3rd Row Seat Replacement (Suburban/Yukon XL) , 3rd Row Seat Replacement (Tahoe/Yukon/Escalade) .
Remove the lower finish cover. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) , Rear Seat Number 2 Cushion Panel Replacement (AW2) .

Rear Seat Latch Release Handle Nut (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Rear Seat Latch Release Handle Assembly