LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 443 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Head Restraint Guide Replacement (Avalanche/Escalade EXT)

Rear Seat Head Restraint Guide Replacement (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Head Restraint & Components
GM1708133Courtesy of GENERAL MOTORS COMPANY
Rear Seat Head Restraint Guide Replacement (Avalanche/Escalade EXT)

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1 Rear Seat Back Trim Panel
Refer to Rear Seat Back Cushion Trim Panel Replacement .
2 Rear Seat Head Restraint
  1. Depress the button on the inboard head restraint guide to raise the head restraint to the full up position.
  2. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
3 Rear Seat Head Restraint Guides
TIP:  Squeeze the bottom of the head restraint guide together and push up to remove.