Rear Seat Armrest Replacement (Tahoe/Yukon/Escalade with Bucket)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Rear Seat Armrest Replacement (Tahoe/Yukon/Escalade with Bucket)
| Callout | Component Name |
|---|---|
| 1 | Rear Seat Armrest Bolt Finish Cover Procedure During re-installation make sure to orientate the finish cover locator to armrest assembly notch. |
| 2 | Rear Armrest Nut
CAUTION:
Refer to Fastener Caution . Tighten 25 N.m (18 lb ft) |
| 3 | Rear Seat Armrest |
| 4 | Rear Seat Armrest Double Ended Stud
CAUTION:
Refer to Fastener Caution . Tighten 15 N.m (11 lb ft) |