Rear Seat 3rd Row Load Floor Latch Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Rear Seat 3rd Row Load Floor Latch Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the rear seat. Refer to 3rd Row Seat Replacement (Suburban/Yukon XL) , 3rd Row Seat Replacement (Tahoe/Yukon/Escalade) . |
|
| 1 | Rear Seat No. 2 Back Latch Finish Cover Refer to 3rd Row Seat Back Latch Cover Replacement (AS3) , 3rd Row Seat Back Latch Cover Replacement (AW2) . |
| 2 | Rear Seat No. 2 Back Cushion Latch Cover Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) , Rear Seat Number 2 Cushion Panel Replacement (AW2) . |
| 3 | Rear Seat No. 2 Back Cushion Latch Cover Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) , Rear Seat Number 2 Cushion Panel Replacement (AW2) . |
| 4 | Rear Seat #2 Load Floor Latch Bolt (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten 55 N.m (41 lb ft) |
| 5 | Rear Seat #2 Load Floor Latch TIP: Release the cables from the latch, note cable location for installation. |
| 6 | Rear Seat #2 Load Floor Torsion Bar Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 16 N.m (12 lb ft) |
| 7 | Rear Seat #2 Load Floor Torsion Bar |