LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 443 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Adjuster Track Finish Cover Replacement

Front Seat Adjuster Track Finish Cover Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Seat Adjuster Track Finish Cover & Components
GM1679194Courtesy of GENERAL MOTORS COMPANY
Front Seat Adjuster Track Finish Cover Replacement

Callout Component Name
1 Front Seat Adjuster Finish Cover (Qty: 2)
TIP:  The 2 side covers snap into place.
2 Inner Adjuster Track Front Finish Cover
TIP:  When re-installing the finish cover, check the retainer for damage. If the retainer is damaged, reinsert a new retainer into the finish cover before installation.
TIP:  The inboard front cover snaps into place.
3 Inner Adjuster Track Rear Finish Cover
TIP:  The inboard rear cover snaps into place.
4 Front Seat Adjuster Finish Cover
TIP:  The seat belt cover snaps into place.
scientia non olet · About LEMON Manuals