Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Belt Assembly Anchor Bolt | 70 N.m | 52 lb ft |
| Body Lock Pillar Garnish Molding Screws | 2 N.m | 18 lb in |
| Body Rear Corner Upper Garnish Molding Screws | 2 N.m | 18 lb in |
| Center Pillar Upper Assist Handle Screws | 1.2 N.m | 10 lb in |
| Center Pillar Upper Garnish Molding Screws | 2 N.m | 18 lb in |
| Coat Hook Screws | 9 N.m | 80 lb in |
| Floor Console Bolts | 6 N.m | 53 lb in |
| Front Floor Console Rear Cupholder Screw | 2 N.m | 18 lb in |
| Jack and Tool Stowage Container Retaining Nut | 5 N.m | 44 lb in |
| Liftgate Trim Finish Panel Screw | 2 N.m | 18 lb in |
| Overhead Console Screws | 2 N.m | 18 lb in |
| Quarter Panel Trim Armrest Screws | 2 N.m | 18 lb in |
| Quarter Panel Trim Screws | 2 N.m | 18 lb in |
| Rear Assist Handle Screws | 6 N.m | 53 lb in |
| Side Door Armrest Bolt | 2 N.m | 18 lb in |
| Side Door Trim Panel Bolt | 2 N.m | 18 lb in |
| Sunshade Screws | 6 N.m | 53 lb in |
| Tool Storage Compartment Bracket Nuts | 50 N.m | 36 lb ft |
| Tool Storage Compartment Nuts | 10 N.m | 88 lb in |
| Windshield Side Garnish Molding Screws | 2 N.m | 18 lb in |
| Windshield Side Pillar Assist Handle Screws | 6 N.m | 53 lb in |