LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 442 (Interior Trim And Interior Paneling) >> Repair Instructions >> Removable Midgate Hinge Finish Cover Replacement (SUT)

Removable Midgate Hinge Finish Cover Replacement (SUT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Midgate Hinge Finish Cover & Clips
GM1709267Courtesy of GENERAL MOTORS COMPANY
Removable Midgate Hinge Finish Cover Replacement (SUT)

Callout Component Name
1 Midgate Hinge Finish Cover
  1. Tilt rear seat backs forward in order to gain access to hinge cover.
  2. Pull upward on hinge cover to disengage clips.
2 Midgate Hinge Finish Cover Clip (Qty: 2)
scientia non olet · About LEMON Manuals